The doctoral dissertations of the former Helsinki University of Technology (TKK) and Aalto University Schools of Technology (CHEM, ELEC, ENG, SCI) published in electronic format are available in the electronic publications archive of Aalto University - Aaltodoc.
|
|
|
Direct Digital Synthesizers: Theory, Design and Applications
Jouko Vankka
Dissertation for the degree of Doctor of Science in Technology to be presented with due permission of the Department of Electrical and Communications Engineering for public examination and debate in Auditorium S4 at Helsinki University of Technology (Espoo, Finland) on the 24th of November, 2000, at 2 pm.
Dissertation in PDF format (ISBN 951-22-5318-6) [4899 KB]
Dissertation is also available in print (ISBN 951-22-5232-5)
Abstract
Traditional designs of high bandwidth frequency synthesizers employ the use of a phase-locked-loop (PLL). A direct digital synthesizer (DDS) provides many significant advantages over the PLL approaches. Fast settling time, sub-Hertz frequency resolution, continuous-phase switching response and low phase noise are features easily obtainable in the DDS systems. Although the principle of the DDS has been known for many years, the DDS did not play a dominant role in wideband frequency generation until recent years. Earlier DDSs were limited to produce narrow bands of closely spaced frequencies, due to limitations of digital logic and D/A-converter technologies. Recent advantages in integrated circuit (IC) technologies have brought about remarkable progress in this area. By programming the DDS, adaptive channel bandwidths, modulation formats, frequency hopping and data rates are easily achieved. This is an important step towards a "software-radio" which can be used in various systems. The DDS could be applied in the modulator or demodulator in the communication systems. The applications of DDS are restricted to the modulator in the base station. The aim of this research was to find an optimal front-end for a transmitter by focusing on the circuit implementations of the DDS, but the research also includes the interface to baseband circuitry and system level design aspects of digital communication systems.
The theoretical analysis gives an overview of the functioning of DDS, especially with respect to noise and spurs. Different spur reduction techniques are studied in detail. Four ICs, which were the circuit implementations of the DDS, were designed. One programmable logic device implementation of the CORDIC based quadrature amplitude modulation (QAM) modulator was designed with a separate D/A converter IC. For the realization of these designs some new building blocks, e.g. a new tunable error feedback structure and a novel and more cost-effective digital power ramp generator, were developed.
Keywords: direct digital synthesizer, numerically controlled oscillator, GMSK modulator, quadrature amplitude modulation, CORDIC algorithm
This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
© 2000 Helsinki University of Technology
Last update 2011-05-26